Water & Pickup
Tennant T7 / Nobles SSR Leaving Water Behind? Squeegee & Vacuum Checklist
Wet trail but no error code? Check the blade, the air leaks, and the tilt — in that order.
Straight-to-the-point walkthroughs from our own techs. Find your problem, press play, and get your machine back on the floor — usually before a service call would even be scheduled.
Wet trail but no error code? Check the blade, the air leaks, and the tilt — in that order.
Wet lines behind your machine? It's usually debris under the blade or poor blade flex. No tools needed.
Decode every beep pattern and light on your T7 so you know what it's telling you before you call anyone.
T7 won't move and beeps twice? It's usually the seat switch circuit. Here's the quick test to prove it.
Seven beeps and no drive? Test the seat switch, throttle pedal, and brake lever with a multimeter.
Drive or brushes cutting in and out? Clean the trigger switch contacts and get back to work.
Breaker keeps popping? Three checks — down pressure, motor wear, and heat — find the cause.
A simple automotive fuse can tell you if the tank safety switch is your problem. Takes about two minutes.
Machine won't power up? Walk through the checks that find the problem fast.
Little or no water reaching the brushes? Follow the troubleshooting path in under three minutes.
Every video has a full written guide with the steps, the parts, and the "why." Browse them all on our blog.
Browse the Blog →Don't lose another shift to a machine that won't run. Book a tech or call us — a real person answers.
Give us your name and number and our team will contact you as soon as possible.
Enter your email below to instantly unlock a $1,000 discount code toward your next equipment purchase.
🔒 We respect your privacy. No spam, ever.