859-484-7337
695 N Main St., Winchester, KY 40391
Your T500e keeps shutting the brushes off mid-scrub You’re halfway down an aisle and the brushes stop. You push the breaker button back in, start again, and ten minutes later it pops again. A breaker that trips once is doing its job. A breaker that keeps tripping is a warning. Something is pulling more current […]
Your T5 won’t move or scrub, and a light is blinking You turn the key on your Tennant T5, squeeze the bail, and nothing happens. Or the brushes stop mid-aisle. Up on the control panel, a light is flashing at you. That flashing light isn’t random. The T5 is telling you exactly what it thinks […]
The scrubber that runs great today You found a used Tennant scrubber on eBay. It powers up, the brushes spin, and the price is right. Then, 50 or 60 hours later, the deck starts tripping breakers. A month or two in, the machine locks up mid-shift. Now you’re looking at a $1,000 service call on […]
Your T600 sounds fine. So why is the floor still wet? The vac motor is humming and the brushes are scrubbing. But when you look back, there are puddles at the ends of the squeegee, streaks down the aisle, or a film of dirty water drying where it shouldn’t be. When a Tennant T600 walk-behind […]
Your scrubber is running. So why is the floor still wet? You finish a pass, look back, and there it is: a wet stripe down the middle, little streaks where there shouldn’t be any, or water spilling off the ends of the squeegee every time you turn. The vac motor sounds fine. No flashing trouble […]
There is nothing more frustrating than making a fresh cleaning pass with a floor scrubber, turning around, and seeing wet streaks, water lines, and dirty trails left behind on the floor. When a squeegee stops picking up water properly, it’s rarely a complex mechanical failure. In 90% of cases, the issue comes down to trapped […]
Your scrubber stops. It beeps. A light flashes. Your operator has no idea what any of it means. So what happens next? The machine sits idle while someone calls it in and waits on hold — for a problem that, half the time, takes 10 seconds to fix. That’s not a machine problem. That’s a […]
Few things stall facility maintenance faster than a floor scrubber deck that keeps shutting off mid-shift. If your Tennant T500 or Nobles Speed Scrub 500 has a left or right deck motor breaker that constantly trips or pops, you’re losing valuable labor hours every time your operator stops to reset it. Don’t just keep pressing […]
17” AND SMALLER MODELS: AVAILABLE IN PAD ASSIST (BA) / PUSH ONLY Smaller deck sizes are lightweight and designed for maximum maneuverability in tight quarters. A separate drive motor adds unnecessary weight, cost, and maintenance without adding benefit. Reduced Operator Fatigue: In larger, wide-open spaces, a dedicated drive motor does the heavy lifting so your crew […]
Give us your name and number and our team will contact you as soon as possible.
Enter your email below to instantly unlock a $1,000 discount code toward your next equipment purchase.
🔒 We respect your privacy. No spam, ever.
