Tennant / Nobles 13″ Soft Nylon Brush set (2-pack) is an aftermarket replacement set engineered specifically for Tennant T7 and Nobles Speed Scrub Rider (SSR) commercial ride-on floor scrubbers with a 26-inch scrub deck. Designed for extra-gentle daily maintenance, this 13″ Soft Nylon Brush pair features flexible soft nylon bristles that provide light agitation without scratching sensitive or high-gloss floor finishes.
Key Features:
• Brush Type & Diameter: 13-inch round disc scrub brushes (includes two soft brushes to cover a full 26-inch scrub path).
• Bristle Material & Pattern: Premium soft nylon filaments set in a circular tuft layout, offering superior bend recovery, chemical durability, and long service life.
• Backing Block Construction: Heavy-duty, high-impact molded composite plastic designed to resist cracking, corrosion, and harsh cleaning solutions.
• Drive Hub System: Features a molded 3-lug drive connection (3-notch clutch plate) that locks directly onto the motor driver hub.
• Scrubbing Application: Ideal for gentle scrubbing on delicate, coated, or high-gloss surfaces, including polished concrete, epoxy, terrazzo, VCT, linoleum, tile, and stone.
Machine & Deck Compatibility:
Specifically designed for 26-inch (650mm) dual-disc scrub decks on the following models:
• Tennant Series: T7 Ride-On Scrubber (26″ Disc Deck)
• Nobles Series: Speed Scrub Rider / SSR (26″ Disc Deck)
• Equivalent OEM Part Numbers: Directly replaces Tennant / Nobles part numbers 1220226, 4037181, 1018377 and related 16″ soft nylon disc brush assemblies.
Detailed Technical Specifications:
• Scrubbing Path Coverage: 26 Inches (650 mm) dual-disc configuration
• Single Brush Diameter: 13 Inches (330 mm)
• Filament Type: Soft Nylon
• Block Type: Water-resistant molded composite plastic block
• Hub Mounting: Standard 3-lug clutch plate adapter
• Recommended Down Pressure: Light / Soft setting
Recommended Operating & Maintenance Guidelines:
To maximize the service life and performance of your 13″ Soft Nylon Brush set, keep these maintenance tips in mind during routine operation:
• Pre-Sweeping: Always perform a light sweep of the work area before scrubbing to remove string, banding, or large debris that could bind around the drive lug hub.
• Initial Break-In: Run brand-new brushes on low down-pressure for the first 10 to 15 minutes using clean water and floor detergent to properly set bristle flex memory.
• Rotation Schedule: Swap left and right side brushes periodically to balance bristle wear and ensure uniform cleaning power across the full 26-inch deck.
• Replacement Indicator: Periodically check bristle length across the block. When bristles wear down to 1/2 inch in height, replace the brush pair to avoid dragging the plastic block on sensitive floor surfaces or overloading the motor hub.
Package Quantity: Sold as a Set of 2 soft brushes (complete replacement for one 26-inch scrub deck).
Have questions about fitment? Call our customer support team today at (859) 484-7337 for expert assistance!